Peco Service And Meter Application is a software that allows you to have an easy time managing your PECO account.
This is the place to be at if you would like to open and acquire this form. Our PDF tool enables you to edit any document easily and quickly. Any platform may be used, including a phone, tablet, or laptop.
Download PDFThe following are some details about peco service and meter application. You may find out its length, the typical time to prepare the form, the fields you will have to fill in, and so on.
| Question | Answer |
|---|---|
| Form Name | Peco Service And Meter Application |
| Form Length | 5 pages |
| Fillable? | No |
| Fillable fields | 0 |
| Avg. time to fill out | 1 min 15 sec |
| Other names | peco service and meter application, peco application service, peco electric service, peco application electric |
INSTRUCTIONS FOR PREPARING APPLICATIONS FOR ELECTRIC SERVICE & METER
Please refer to the sample application while reviewing the following notes. The letters below correspond with those on the sample. NOTE: THE "BLANK" FORM IS BELOW THE "SAMPLE" FORM
A. After reading the instructions at the top of the application, locate the PECO regional office in which the service is requested. Check the appropriate box and mail or fax the completed application to the appropriate regional office.
B. Complete the fields for customer's name and service location. Customer's Driver's License Number or Social Security Number is now required.
Note: (*) Include PECO Energy pole # and/or Lot # only if applicable.
(**) Use the address of the service when applying for underwriter's inspection.
C. Complete the fields for customer's PECO billing address or account number (within last 60 days).
D. Complete fields regarding you as the electrician or contractor, and indicate where you would like the reply sent. The Electrician/Builder Tax Identification number is now required. Also, please include the date you would like the reply returned to you.
E. Indicate your current construction status, and include the date PECO service is requested. Please avoid using "as soon as possible".
F. thru J. Indicate the following:
• Type of Request
• Type of Service (include number of units and area per unit)
K. Complete the table concerning the load characteristics of the service. For each applicable type of load, provide: 1) Connected KW, 2) Maximum Summer KW Demand, and 3) Maximum Winter KW Demand.
L. Complete the table concerning motor information.
M. If compensated metering will be used, indicate totalizer and general load (KW).
N. Include any additional comments.
Application MUST be signed and dated.
Application for Electric Service & Meter
Please complete the front page of this request and return to the PECO Regional Office (listed below) in the area service is required. Incomplete information may result in a delay in processing.
All work must comply with PECO Electric Service Requirements manual and be inspected by an approved inspection agency . (City of Philadelphia requests may be shared with Licenses & Inspections). Not all service voltages are available in all areas. Before purchasing electrical equipment or proceeding with any wiring , information regarding service availability and meter location should be obtained from the company .
A credit application and agreement must be completed if the customer has not had PECO service within the last 60 days. The company reserves the right to cancel this request if no further communication is received from the customer within 90 days of PECO's response date.
NOTE: IF DEMOLISHING A BUILDING AND NEED PECO TO REMOVE ELECTRIC OR GAS FACILITIES, PLEASE CALL (PA ONE CALL) FOR DEMOLITION REQUEST
NEW BUSINESS SERVICES http://www.peco.com
DELAWARE & CHESTER COUNTIES
1050 W. Swedesford Rd.
830 S. Schuylkill Ave.
Berwyn, PA 19312
Philadelphia, PA 19146
Warminster, PA 18974
Reintroduction of Service
Separation of Wiring
** ADDRESS TO BE SERVED
TYPE OF SERVICE: Please include site plan.
Area of Building _______________________ Sq. Ft.
** Please use this address when applying for underwriter’s inspection
CUSTOMERS BILLING ADDRESS
PECO ENERGY ACCOUNT#
ELECTRICIAN’S OR BUILDER’S NAME
Two Meters, Commercial (General/Totalizer)
Single Meter Required
Multiple Meter Total No. _____________
Reply Requested by:
Central Air _____ Tons
Heat Pump _____ Tons
CHARACTERISTICS OF NEW OR ADDITIONAL LOAD:
PECO ENERGY USE ONLY (DEMAND)
CURRENT CONSUTRCTION STATUS:
Not Started – Date Customer Will Start Work : _____/_____/_____
In Progress Completed
Approximate Date Service Requested: _____/_____/_____
TANKLESS WATER HTR
CUSTOMER COMMENTS/ DESCRIPTIN OF WORK
Include single line diagram and substation arrangement if appropriate.
LARGEST MOTOR SPECIFICATIONS
LOCKED ROTOR CURRENT
MOTOR CODE LETTER
SUBMITTED BY: _________________________________ DATE: ______________________
Application for Electric Service & Meter
Enclosures: Site Plans Single Line Diagram Substation Arrangement
FREQ. OF STARTING (PER HR.)
INFORMATION BELOW WILL BE FILLED IN BY PECO:
Service Request No.
BUS/MAJ ACCT REP
SERVICE CHARACTERISITICS – Select One from Each
POLE # / MH # LOCATION
CUT THROUGH DATE
GENERATION PROCUREMENT CLASS:
Class 1 (Residential)
Class 2 (Commercial, less than 100kW)
Class 3 (Commercial, 100kW to 500kW)
Class 4 (Commercial, greater than 500kW)
NOTE: The customer’s Initial Procurement Class will be determined by PECO, based on peak load
estimates for the first year of service. The customer’s Procurement Class will be adjusted each year,
based on actual usage.
METERING LOCATION AND REQUIREMENTS:
Present Service OK
See Job # ________________________________
On ________ Wall, ________ Ft. From ________ Wall, ________ ft. Above
Customer to Trench
ACT 222 Cert. Required
Application for Electric Service & Meter
Please complete the front page of this request and return to the PECO Regional Office (listed below) in the area service is required. Incomplete information may result in a delay in processing.
All work must comply with PECO Electric Service Requirements manua l and be inspected by an approved inspection agency . (City of Philadelphia requests may be shared with Licenses & Inspections). Not all service voltages are available in all areas. Before purchasing electrical equipment or proceeding with any wiring , information regarding service availability and meter location should be obtained from the company.
A credit application and agreement must be completed if the customer has not had PECO service within the last 60 days. The company reserves the right to cancel this request if no further communication is received from the customer within 90 days of PECO's response date.
NOTE: IF DEMOLISHING A BUILDING AND NEED PECO TO REMOVE ELECTRIC OR GAS FACILITIES, PLEASE CALL (PA ONE CALL) FOR DEMOLITION REQUEST
NEW BUSINESS SERVICES http://www.peco.com
DELAWARE & CHESTER COUNTIES
830 S. Schuylkill Ave.
1050 W. Swedesford Rd.
Philadelphia, PA 19146
Berwyn, PA 19312
Warminster, PA 18974
Warminster, PA 18974
Reintroduction of Service
** ADDRESS TO BE SERVED
Separation of Wiring
TYPE OF SERVICE: Please include site plan.
Area of Building _______________________ Sq. Ft.
Please use this address when applying for underwriter’s inspection
CUSTOMERS BILLING ADDRESS
PECO ENERGY ACCOUNT#
ELECTRICIAN’S OR BUILDER’S NAME
Two Meters, Commercial (General/Totalizer)
Single Meter Required
Multiple Meter Total No. _____________
Reply Requested by:
Central Air _____ Tons
Heat Pump _____ Tons
CHARACTERISTICS OF NEW OR ADDITIONAL LOAD:
PECO ENERGY USE ONLY (DEMAND)
CURRENT CONSUTRCTION STATUS:
Not Started – Date Customer Will Start Work : _____/_____/_____ In Progress Completed
Approximate Date Service Requested: _____/_____/_____
TANKLESS WATER HTR
CUSTOMER COMMENTS/ DESCIPTION OF WORK:
Include single line diagram and substation arrangement if appropriate.
LARGEST MOTOR SPECIFICATIONS
LOCKED ROTOR CURRENT
MOTOR CODE LETTER
SUBMITTED BY: _________________________________ DATE: ______________________
Application for Electric Service & Meter
Enclosures: Site Plans Single Line Diagram Substation Arrangement
FREQ. OF STARTING (PER HR.)
INFORMATION BELOW WILL BE FILLED IN BY PECO:
Service Request No.
BUS/MAJ ACCT REP
SERVICE CHARACTERISITICS – Select One from Each
POLE # / MH # LOCATION
CUT THROUGH DATE
GENERATION PROCUREMENT CLASS:
Class 1 (Residential)
Class 2 (Commercial, less than 100kW)
Class 3 (Commercial, 100kW to 500kW)
Class 4 (Commercial, greater than 500kW)
NOTE: The customer’s Initial Procurement Class will be determined by PECO, based on peak load estimates for
the first year of service. The customer’s Procurement Class will be adjusted each year, based on actual usage.
METERING LOCATION AND REQUIREMENTS:
Present Service OK
Wall, ________ Ft. From ________ Wall, ________ ft. Above Ground
See Job # _________________________________
Underwriter’s Cert. Required
Advance Billing Required Yes
Customer to Trench
No Customer Charges: $_________________
ACT 222 Cert. Required
PA One Call # ___________________________
It's easy to fill in the peco forms form using this PDF editor. The following steps will assist you to immediately get your document ready.
Step 1: The initial step will be to choose the orange "Get Form Now" button.
Step 2: Now you can update the peco forms. The multifunctional toolbar lets you insert, erase, adapt, and highlight content or conduct similar commands.
To be able to create the file, type in the information the program will request you to for each of the appropriate parts:
Jot down the information in ADDRESS TO BE SERVED, APARTMENTLOT, New Service Temporary Service, Load IncreaseDecrease, Service, MakeSafe De energizeCover, CITY STATE, ZIP CODE, TYPE OF SERVICE Please include, UTILITY POLE, SUBDIVISIONDEVELOPMENT, TOWNSHIPMUNICIPALITYWARD, RESIDENTIAL, COMMERICAL, and Single House Apartment Duplex.
Indicate the crucial information in CURRENT CONSUTRCTION STATUS Not, AIRCOND, Approximate Date Service Requested, CUSTOMER COMMENTS DESCRIPTIN OF, TANKLESS WATER HTR, MISC, TOTAL, Include single line diagram and, TOTALIZER LOAD, GENERAL LOAD, SUBMITTED BY DATE, and VOLTAGE part.
You'll need to identify the rights and responsibilities of both parties in section Enclosures Site Plans Single, FREQ OF STARTING PER HR PURPOSE, INFORMATION BELOW WILL BE FILLED, DATA RECEIVED, TELEPHONE, DESIGNER, TELEPHONE, DATA RECEIVED, Service Request No, POL SUB, RATE, RIDER, CONTRACT LIMITS, SIC NUMBER, and T NUMBER.
End by looking at these sections and filling them out as required: SINGLE PHASE, TWO PHASE, THREE PHASE, SERVICE REQUIREMENTS, METERING LOCATION AND REQUIREMENTS, Present Location, Meter, CTs, PTs, Outdoor On Wall Ft From Wall, Present Service OK Taps Only, Loop Only See Job, Indoo r, ADVANCE NOTIFICATIONS, and Underwriters Cert Required.
Step 3: Hit the button "Done". Your PDF form can be exported. It is possible to upload it to your laptop or email it.
Step 4: Prepare duplicates of your template. This will save you from possible issues. We do not look at or share your data, thus feel comfortable knowing it will be protected.
